Finger Protection PRO 180° Door Safety PACK
Finger Protection PRO 180° Door Safety PACK
Finger Protector Door Hinge Guard Kit for wider opening doors. This pack covers both sides of the door.
This is a two piece Kit. One wide strip to cover wide door jamb gap on the “Push Side” of the door and one narrow strip to cover the narrow hinge pin side gap on the “Pull Side” of the door. Suitable for all all doors as well as doors that need to open approximately 170 to 180 degrees. Ideal for schools, public and commercial buildings. Tested for 1,000,000 opening and closing movements which is 4 x times more than our Transparent Finger Protection door safety strips but not 4 times the price :-)
Suitable for most types of PVC and Metal doors as well as wooden. For suitable door applications please click this link.
The hinge gap opening angle from door to door frame should measure no more than 20 cm/7.9 inches
Maximum thickness of door on which it can be used is 7 cm/ 2.76 inches
Available in 180 cm and 195 cm length. Colours: White (RAL 9016) or Anthracite (7016) or Silver Grey (RAL 7040)
229 cm also available by special order. Please call to discuss if you require either of these two sizes.
Prices include VAT.
You can also use our easy step Selection Guide to pinpoint the product for your needs.
DOOR SAFETY FOR CHILDREN IN YOUR CARE. AVOID TRAPPING OF FINGERS IN THE GAPS OF THE DOOR JAMB.
180 cm and 195 cm lengths available.
Tested for 1,000,000 opening and closing movements ( 4 x times more than our Transparent Finger Protection door safety strips)
Fire Retardant as per UL94 Norm
Available in white or anthracite.
Suitable for PVC and Aluminium doors as well as wooden
Allows for the door to be opened approximately 170 to 180 degrees
The hinge gap opening angle from door to door frame should measure no more than 20 cm/7.9 inches
Maximum thickness of door on which it can be used is 7 cm/ 2.76 inches
Easy DIY install takes 5 to 8 minutes
Easy to remove for door maintenance. With others you have to remove all screws again (screws not included)
Screws are not visible therefore more aesthetically pleasing unlike others (screws not included)
SKG-IKOB++ certified product.
First and only door strip to obtain the SKG-IKOB certificate for durability making it the best one in the world
Meets the highest finger door guard norms in the world - SKG® certified and comply with EN16654 and NEN8654
Suitable for swing doors (needs two of the wide strips - click here )
Suitable for automatic doors (meets the new EN 16005 norm)
Made in The Netherlands
This Finger Protection PRO Door Safety Strip Kit is a complete package with two strips included in the price – it is regarded as the ultimate door safety kit and is the first in the world to obtain the SKG-IKOB certificate for durability making it the best one in the world.
This PRO kit is perfect for schools, creches, montessori, public and commercial buildings. It fits on fire doors, swing doors, pivot doors and automatic doors. The strip comes with click strips, already applied adhesive tape, and pre drilled holes for screws which we advise are used to ensure secure fitting. The kit is easily removed and reapplied for any future door maintenance required i.e painting.
The Finger Protection PRO Kit package allows for approximate 170 to 180 degree opening of doors. If the door opens around to the back of the wall, as in the case of some double fire doors in larger buildings then we would recommend the Finger Protection Pro Kit which consists of two strips together – one for the wide door jamb gap on the Push side of the door and another to cover the hinge pins on the Pull side where the narrow gap is. It is highly recommended that you read our ‘Useful Info’ page in order to help you with your product consideration.
For suitable door applications please click this link
Video of Installation
This following youtube video is for the 180 PRO wide strips - the wide strip for the wide gap. Pay attention to the fact that he puts the "click strip" on the door and that the "wide strip" fixes to the door frame which then reaches over and across the click strip that you have already fitted to the door and clicks into it. And finally, just make sure that the click strip is orientated the correct way. By that I mean that the open slit that accepts the wide strip to click into it is facing towards the handle and not the door jamb gap. The video link here will let you know what I mean.
This youtube video below is for the narrow strip from the 180 PRO kit covering the narrow gap and the actual physical hinge pins themselves. Same principle as above. Click strip on the door looking at the handle etc.
One satisfied customer from Norway told us that "this is the same product we mounted in another school 2 years ago. They are not showing signs of anything wrong, even though our calculations says that these doors have been opened/closed more than 500 000 times"
We only sell & deliver within Ireland.
If used externally the lifespan of the product will be shorter due to the weather elements.